PXF-600 Polyasartic Permeable Floor Coating - Good bonding | super
weather resistance | Ultra clear
INTRODUCTION: PXF-600 is a two-component reaction curing transparent adhesive
made of polyaspartic resin and HDI hardener, with interpenetrating
structure and multi-functional chemist bonding, it can provide
strong adhesion and substrate adhesion for permeable floor layer.
Chemical toughening and modification can give the cured good
flexibility, effectively avoid the excessive brittleness of
traditional adhesive, effectively absorb the stress from the ground
materials, and form a certain degree of rigid flexible Island
effect, it’s has good anti- QUV properties, anti-aging and
FEATURE: The process of permeable stone flooring is to bond stone with
adhesive by "point bonding", that requires the adhesive must has
high adhesion, weather resistance, acid and alkali resistance,
water erosion resistance, wear resistance and impact resistance.
1-100% solid solvent-free formula, odorless, non-toxic,
2-Strong and tough adhesion, ultra - clear, high gloss, wetting
effect on color aggregate without changing the stone primary color.
3- Adjustable viscosity to adapt to different climatic conditions
and avoid back sealing of permeable products.
4- Working time is 60min, can walk 6hours and fully open traffic
for 24 hours after operation.
5- Super weather resistance, anti-QUV, outdoor use.
6- Color can be ultra-clear or being customized.
APPLICATION: sidewalk, bicycle greenway, interior decorative wall, public
square, road in park, campus road, community road, outdoor wall,
pool floor, etc.
1 - Preparation of colored stone aggregate
- The stone aggregate needs to be dried first. If there is too much
stone powder, it is necessary to clean it.
2- Stone aggregate & adhesive mixing
- Fully premix A and B two-component adhesive at the proposed ratio
of 1:1, forcedly mix the stone aggregate to a uniform state by
small cement mixer.
3- Dumping and spreading
- When pouring materials, firstly clean the dust on the base layer
and ensure that substrate is dry and free of moisture.
4- Stone aggregate spreading
- After the material is poured out, spread it as soon as possible.
The operation time is 50-60 minutes. It can be spread manually or
5-Trimming and troweling
- When finishing, pay attention to the overall flatness, and timely
repair the concave and convex.
6- Waiting for forming
- After trimming, it can not be done after 6 hours, and the opening
time can be fully released after 24 hours. Attention shall be paid
to prevent personnel from stepping on it.
Tools: small mixer, mud bucket, grinder, knife
Stone Aggregate : according to the color type and stone size
selected by customers.
Material: PF-600 Polyaspartic adhesive
|Part A||Resin||Part B||Hardener|
|Viscosity 25 ℃||1500mpas||Viscosity 25 ℃||1300mpas|
|Specific gravity 25 ℃||1.05||Specific gravity 25 ℃||1.1|
|Solid content||97%||Solid content||99%|
PROPERTIES AFTER CURING
|7-day hardness||Shore D 75|
|Abrasion (CS17 wheel 750g, 500r) / Mg||25|
|Elongation at break (%)||5|
|Tensile strength (MPA)||25|
|Concrete adhesion (MPA)||2.2|
|Acid resistance||no change in 5% sulfuric acid|
|Alkali resistance||no change in 10% sodium hydroxide|
- BLEND RATIO
Adhesive A : Adhesive B = 1 : 0.7
Adhesive : Stone aggregate = (3 ~ 5) : 100
- WORKING TIME
|Mixed service life (min)||60||45||35|
- CONSTRUCTION CONDITIONS
Ambient temperature: 0 ℃ - 35 ℃, ambient humidity: ≤ 85%
Substrate temperature: must be more than 3 ℃ above the air dew
Cleaning agent: standard diluent of polyaspartic
- DRY TIME AND RECOAT INTERVAL
Temperature (℃) : 25
Walking opening hours (HRS): 6
Vehicle opening hours (HRS) : 24
The above data is only for guidance, and the real curing time is
highly related to the ambient temperature and humidity.
Storage time: Paint - 1 year | Curing agent - 9 month
Storage temperature: 5 ℃ - 35 ℃
Paint: 20kg | Curing agent: 14kg
- Avoid direct contact with skin and eyes.
- If the paint reach the skin, it shall be cleaned with appropriate
detergent. If paint comes into eyes, use plenty of water to rinse
and seek medical attention immediately.
- Ensure good ventilation.
- Paint contains combustible substances. Please keep away from
sparks and do not smoke near the work area.
- All health and safety regulations shall be observed on site.
- The information provided in this product manual is entirely based
on our knowledge in the laboratory and in practice. But because the
use of products is usually beyond our control, we only guarantee
the quality of products. We reserve the right to modify the
specification without prior notice